MIK-RD901 Radar level meter for corrosive liquid
-
Specification
| Product | Radar level meter |
| Model | SUP-RD901 |
| Measure range | 0-10 meters |
| Application | Corrosive liquid |
| Process Connection | Thread, Flange |
| Medium Temperature | -40℃~130℃ |
| Process Pressure | -0.1~0.3MPa |
| Accuracy | ±5mm（Less than 5 m） / ±10mm (5~10 m) |
| Protection Grade | IP67 |
| Frequency Range | 26GHz |
| Signal Output | 4-20mA |
| RS485/Modbus | |
| Power supply | DC(6~24V)/ Four-wire DC 24V / Two-wire |
-
Introduction
-
Product Size
-
Installation guide
Be installed in the diameter of the 1/4 or 1/6. The minimum distance from the tank wall should be 200mm.
Note: ① datum ②The container center or axis of symmetry
The top conical tank level, can be installed at the top of the tank is intermediate, can guarantee the measurement to the conical bottom
A feed antenna to the vertical alignment surface. If the surface is rough, stack angle must be used to adjust the angle of cardan flange of the antenna to the alignment surface.
Write your message here and send it to us
